Top 8 best work boots for electricians
What work boots can be called Electrician Work Boots？
Electrical insulation shoes are one of the safety shoes series, generally divided into low voltage 5KV insulation or high voltage insulation above 10KV. As electrician boots worn by electricians during power distribution operations, proper use is an important prerequisite for safety assurance.
10 tips for purchsing and using electrician boots
If there is a risk of electric shock, you should wear electrically insulated shoes and electrical hazard work boots suitable for the dangerous degree of the working environment. Use them as auxiliary safety equipment and labor supplies during work.
Note that electrical safety boots cannot guarantee 100% protection against electric shock, and it is necessary to avoid this dangerous additional test. These tests, like the additional tests mentioned below, should be part of the daily risk assessment procedure.
During the service life, the electrical avoidance performance of insulating shoes should meet the requirements at any time.
It is forbidden to wear it in places contaminated with sole materials, such as chemicals. Entering such dangerous areas will affect the electrical performance of the shoes.
Boots for electricians may be damaged by nicks, cutting, abrasion or chemical pollution during use. Regular inspections should be made. Damaged shoes should not be used with insulated shoes.
It is recommended that the user establish a suitable means of checking and testing the electrical insulation performance of the shoes.
The working environment of electrical safety boots should be kept dry.
The withstand voltage and leakage current value of the work boots for electricians after preventive inspection should meet the standard requirements, and the validity period of each preventive inspection result shall not exceed 6 months.
The storage period is 24 months. Products over 24 months need to undergo preventive electrical performance inspections one by one. Only after passing the inspection can they be used with insulated shoes.
It is strictly forbidden to come into contact with sharps, high temperature, acid, alkali or other corrosive objects. During storage, it should be stored in a dry and ventilated warehouse to prevent mildew, and stacked above the ground and wall 0.2M.
After introducing some basic knowledge of electrician work boots, as a manufacturer of work boots, we will give customers professional buying guide and evaluation
Electrician work boots reviews
1.Male electrician steel toe boots for feet protection
Wear resistance and non-slip is one of the most basic elements that safety shoes need to have. The craft of the electrician steel toe boots is a cold rubber outsole, and the leather is Indian buffalo leather. Applicable industries: petrochemical, aviation, shipbuilding, mining, automobile, transportation, storage, construction, medicine, machinery, metallurgy.
The built-in European standard steel toe can withstand an impact of 200J. A new breakthrough in the sole, with irregularly shaped anti-skid areas and tight anti-skid stripes, which effectively increases the friction between the sole and the upper and improves the grip; the anti-skid structure on both sides-the lateral anti-skid structure spreads from the front to the back, which can effectively increase the friction between the sole and the upper and improve the grip. Ensure anti-skid on both sides to effectively prevent side slip; anti-skid heel structure-to ensure anti-skid protection when going downhill to ensure safety when going downhill.
1.European standard steel toe
2.Electrical protection sole
1.Poor air permeability
2.Insulated 6KV breathable electrical safety boots by fashion style
This is a pair of electrical safety boots, a brand new safety experience, 6KV insulation, always protect safety. Multi-layer protection, guarding global workers.
The interior uses insulated and comfortable Hyperion insoles (a new disruptive insole), which can achieve adaptive cushioning and rebound according to different sports conditions. When you walk slowly, the molecules separate from each other, like stepping on a sponge at a large angle. And stitched with anti-static wire to adapt to the work of electricians
Use safety insulated plastic toe caps. It can protect the toes reasonably without squeezing or rubbing the feet. The sole is made of bullet-proof KFL material, which is light in weight, stab-resistant, and has stronger abrasion resistance.
3.Electrician insulated work boots with steel toe puncture
This is a pair of lightweight and comfortable Electrician insulated work boots, which have the following safety features.
Anti-smashing and anti-puncture: steel toe, non-conductive Kevlar midsole.
Breathable: Textile upper made of first-class weaving technology
Sole: injection-molded sole with electrical protection to prevent electrical breakdown
Reflective design: reflective at night for safety protection. The large diamond-shaped reflective area can effectively reflect light at night and can be used safely for 24 hours.
Convenient rope strap: easy to put on and take off, rope design.
Lightweight: easy to walk, get rid of the heavy burden of traditional work shoes, light and not tiring.
2.Electrical hazard protection
3.Fashion and stylish
1.Poor slip resistance
4.lightweight and anti-smashing electrical hazard work boots
The upper of this pair of electrical hazard work boots is composed of non-conductive suede + breathable mesh, which covers the entire instep well. Safety insulation 6KV, assist electricians to work, prevent electric shock accidents within a certain voltage range, soft and comfortable, will not bind the feet, electrical protection PU solid outsole.
Lightweight, comfortable, not tired, lightweight material body, zero wear experience, you will not feel tired, you can walk freely. Wear-resistant woven shoelaces are stylish, wear-resistant, comfortable and resistant to tension.
5.Electrician insulated 6kv best boots for electricians
This is MKsafety®-best boots for electricians, which fully meets the needs of electricians
1. The toe cap adopts the anti-smashing toe cap, which can effectively prevent the impact and impact of hard objects and effectively protect the toes.
The sole contains an insulated Kevlar puncture-proof midsole, which can effectively protect the fragile sole and prevent the foot from being punctured.
2. Cowhide: Use full-grain cowhide, waterproof and anti-static.
3. Wear-resistant non-slip rubber outsole, multi-angle tire pattern design to prevent electric shock from penetrating the sole
4. Hand-stitched, the upper stitching is even and dense, strengthening the shoe body; clean and simple cutting skills, smooth lines.
5. Nylon elastic shoelace, non-slip and not easy to fall off, firm and not easy to break.
6. Anti-static function, add anti-static material to the insole material to better ensure the normal work of workers.
It is suitable for high-altitude operations, power maintenance and other environments
6.Most comfortable work boots for electricians
Most comfortable work boots for electricians. The upper is made of non-conductive rough leather and nylon mesh; the lining is made of comfortable polyamide; the insole is made of non-removable polyamide ECA; and the dual-density PU injection sole with electrical protection. Comes with a steel head and a puncture-proof midsole. Provides shock-absorbing heel protection and non-slip teeth.
Upper: a mixture of suede leather and nylon mesh, insulation material
Sole: Dual-density polyurethane injection PU outsole to prevent electrical breakdown
Inside: polyamide lining, wicking and breathable
Insole: foam EVA material, breathable and comfortable
Function: anti-smashing, anti-stab, anti-static, non-slip, wear-resistant, oil-resistant
The combination of wool cowhide upper and breathable mesh allows air to circulate in the shoe. Using precise double stitches, the lines are natural and smooth, dynamic and fashionable. Classic shoe last design, ergonomic foot characteristics, casual atmosphere; EVA shock-proof midsole can prevent the impact of heels on the ground, while maintaining the stability of the feet! Suitable for practitioners in the power industry
7.Low top anti static best work boots for electrician
The upper of best work boots for electrician uses leather insulation technology, suede cowhide, braided laces, breathable lining, anti-smashing steel toe, and a strong outsole that prevents electric shock. European standard steel toe cap + anti-static function; large area leather upper, worry-free walking; comfortable suede leather stitching, breathable and comfortable; soft and resistant to folding, no need to walk; lightweight shoes, not tired to walk; breathable honeycomb lining plus Wide braided rope, stylish personality.
1.Low top design
2.Electrical hazard protection
1.Poor air permeability
8.Insulation 6 KV electrician work boots for workers
The composition of electrician work boots for workers: anti-smashing steel headgear; imported cowhide anti-tearing laces + anti-rust shoe buckle; thickened sponge lining; polyurethane dual-density PU sole; built-in anti-puncture steel plate.
Upper material: imported two-layer cowhide
Sole material: Polyurethane dual density PU sole, electrical hazard protection
Main function: anti-static, insulation 6KV.
About the details:
Imported high-quality two-layer cowhide, non-slip, anti-wrinkle, waterproof, oil-resistant upper. Selected high-quality two-layer cowhide, super tear resistance, soft and delicate natural texture, three-dimensional cutting, one piece of material, fine polishing, to ensure that each pair of shoes can be comfortable, breathable and highlight the way of engraving details. Very suitable for electricians and high-altitude workers
Electrician work boots are mostly made of cowhide upper and rubber sole. Electrical insulating leather shoes with a power frequency voltage of less than 15KV are suitable for working environments with a power frequency voltage of less than 1KV. When using, must strictly abide by the electrical safety work regulations. The higher the insulation voltage, the smaller the current that the human body will withstand when an electric shock accident occurs. At present, the electrician shoes insulation test is 6KV. According to your own working voltage and working nature, choose the most suitable insulating shoes with a cost-effective price.
①Be careful not to get damp, this product is strictly forbidden to use. Once it gets damp, place it in a ventilated and cool place to dry naturally to avoid deformation and damage of leather shoes. After the sole is pierced by a foreign body, it cannot be used as an insulating leather shoe.
②Electrician work boots should not be worn on rainy days, and should not be washed in water, otherwise they are prone to disconnection, degumming, discoloration, and salt frost.
③Electrician work boots should not be in contact with oils, acids, alkalis and sharp substances to prevent corrosion, deformation and damage.